iglidur® J3, flanged bearing, mm - J3FM

iglidur® J3 | The new endurance runner: Specialist for pivoting and pulsating loads
iglidur® J3 is a material with improved wear resistance at low to medium loads and high speeds. The service life is up to 300% longer than with iglidur® J, the proven top endurance material.

Typical application areas

Machine technology
Printing industry
Beverage industry
Glass industry
Aviation

Here you will find further possible applications:
Industry solutions
 

When to use it? When optimising wear resistance compared to iglidur® J When very low coefficient of friction in dry operation are required When high wear resistance at low loads is required When low moisture absorption is fundamental When good liquid media resistance is required

When not to use it? When a wear-resistant bearing for linear strokes is required iglidur® J, flanged bearing, mm If temperatures permanently higher than +90°C occur iglidur® J260, flanged bearing, mm When radial surface pressures greater than 45MPa occur iglidur® W300, flanged bearing, mm Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. With the material, the moisture absorption and the thermal expansion are decisive. Bearings with low moisture absorption can be installed with a small bearing clearance. The following applies to the wall thickness: The thicker the bearing, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only set after pressing into the housing bore with the corresponding tolerance. The press-fit interference can be up to 2% of the inner diameter. This ensures a secure press-fit of the bearings. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining